Spearfishing & Freediving

The blade of the Gara Modular Impulse completes the range of Cressi fins, inserting a bending angle of 29 degrees, which allows you to further increase the dynamic performance of the fin. The blade has an incredible resistance to any type of shock, impact or stress, making it almost impossible to break accidentally.TECHNICAL FEATURES:- Excellent propulsive performance without tiring anyone, beginners or professionals- Extremely thin and light blade in compound made of elastomerized technopolymers developed by Cressi with different thicknesses- Stringer consisting of technopolymers with elastomeric loads with high exural modulus- Footpocket / blade angle of 29 degrees Learn More

Following the Impulse project we have successfully transferred the same design parameters for S-shaped undulating deformation to this innovative fin.

This particular movement permits a notable accumulation of elastic potential energy in the blade, which is released in the return kick, transforming into thrust.

The thermoplastic rubber used for the water channelling rails is extremely flexible and soft so as not to undermine the intrinsic characteristics of the blade.

Learn More

The blade of the Gara Modular Impulse completes the range of Cressi fins, inserting a bending angle of 29 degrees, which allows you to further increase the dynamic performance of the fin. The blade has an incredible resistance to any type of shock, impact or stress, making it almost impossible to break accidentally.TECHNICAL FEATURES:- Excellent propulsive performance without tiring anyone, beginners or professionals- Extremely thin and light blade in compound made of elastomerized technopolymers developed by Cressi with different thicknesses- Stringer consisting of technopolymers with elastomeric loads with high exural modulus- Footpocket / blade angle of 29 degrees Learn More

Umberto Pelizzari. This mythical name and not much more would be enough to describe these fins. Tens of thousands of hours spent training, an impressive series of World Records in Constant Weight make Umberto an absolute reference when it comes to knowledge and experience in the use of freediving equipment.

The new UP fins featuring technopolymer blades and 250 foot pockets are the result of the close collaboration between Umberto and C4.

The Technopolymer Blade Fin has been created by using the most recent plastic moulding technologies. Performance, which has always been a real obsession for Umberto, is at the basis of this project.

Learn More

New Maximum 23° Carbon fins with the famous Fireblade footpocket from Pathos.
New longer and wider blade Learn More

Long fins for freediving and spearfishing. The Gara Professional LD is the model that follows the already successful Professional fin with the difference found only in the hardness. As far as the other characteristics are concerned, they are the same. The blade is made from elastomer polypropylene and is one piece with the foot pocket. The new foot pocket is designed so as to position the foot under the actual blade, reducing effort and energy dispersion. Finally the reduced weight combined with the soft new age plastic material makes it ideal for spearos who cover large distances by swimming or who are not fond of hard fins. Learn More

The new Gara Turbo Sprint fin is a shorter version of the Gara Turbo fin.

Sprint is designed to meet the needs of freedivers and spearfishers who practice this sport in wintertime and when a blade as long as Impulse is not necessary.

Both fins have been designed using expensive finite element software programs that allow highly complex and
equally high-performance sections to be defined.

The blade of Sprint, like the Impulse blade, is mad of a single thermoplastic elastomer, although it would be more correct to refer to an angled sublayer and an overlay.

The sublayer follows the shape and dimensions of almost the entire fin.

It has a uniform thickness and a flexible longitudinal propulsion wing of variable length.

When disassembled, the blade and foot pocket occupy the space of a normal snorkeling fin.

The new Gara Modular Sprint fin is a shorter version of the Impulse
fin, which proved to be hugely popular with freedivers worldwide,
both amateurs and the most demanding professional freedivers.
This is also confirmed by the large number of articles dedicated to
it by specialized journalists in sector magazines.
Sprint is designed to meet the needs of freedivers and spearfishers
who practice this sport in wintertime and when a fin as long as
Impulse is not necessary.
Both fins have been designed using expensive finite element
software programs that allow highly complex and equally highperformance
sections to be defined.
The blade of Sprint, like the Impulse blade, is made of a single
thermoplastic elastomer, although it would be more correct to
refer to an angled sublayer and an overlay. The sublayer follows
the shape and dimensions of almost the entire fin. It has a uniform
thickness and a flexible longitudinal propulsion wing of variable
length. In contrast, the so-called overlay covers the propulsion wing
selectively and has a thickness that slopes from the maximum value
to zero longitudinally towards the tip of the blade.
As a result, the fin offers a new way of storing and releasing elastic
potential energy, greatly assisting movement of the freediver’s legs
and thus guaranteeing a net improvement in propulsive output.
When disassembled, the blade and foot pocket occupy the space of
a normal snorkeling fin.

TECHNICAL FEATURES
- Excellent propulsive performance without tiring anyone,
beginners or professionals
- Thermoplastic rubber foot pocket ,certified Full Contact
- Standard blade/stringer interface with screws under
the foot pocket and side clips
- Extremely thin and light blade in compound made
of elastomerized technopolymers developed by Cressi
with different thicknesses
- Stringer consisting of technopolymers with elastomeric loads
with high flexural modulus
- Foot pocket/blade angle of 29 degrees

Learn More

The Technopolymer Blade Fin has been created by using the most recent plastic moulding technologies. Performance, which has always been a real obsession for Umberto, is at the basis of this project. PRICE FOR 1 BLADE Learn More

New Elliptic Carbon Blades from Apnea
In four stiffness types:

79cm x 19cm. Learn More

Carbon Blades Neró are suitable for freediving in deep water, lakes & pools, in complete comfort for the best performance.

The surface finishing is the typical Neró pattern.

LENGTH: 820mm / WIDTH: 190mm / ANGLE: 33°

WATER RAIL: Grey / Constant  

HARDNESS: SOFT and MEDIUM

Learn More

New Ultimate 28° Carbon fins with the famous Fireblade footpocket from Pathos.
New longer and wider blade Learn More

New Elliptic Carbon Blades from Apnea
In four stiffness types:

79cm x 19cm. Learn More

New Elliptic Carbon Fins from Apnea with c4 400 footpockets
In 3 stiffness types:

790mm x 190mm. Learn More

New Evolution Carbon Fins from Apnea with c4 300 footpockets
In 3 stiffness types:

840 x 185 mm Learn More

Carbon Maximum 23° blades 100% carbon.
Wider and longer blade made for Fireblade footpocket.

Soft for diver's weight < 75kg

Medium for diver's weight 75kg - 90kg

Hard for diver's weight > 90kg

Learn More

New Elliptic Carbon Blades from Apnea
In four stiffness types:

79cm x 19cm. Learn More

New Spirit Carbon Fins from Apnea with c4 400 footpockets
In 3 stiffness types:

810 x 195mm. Learn More

Carbon Blades Neró are suitable for freediving in deep water, lakes & pools, in complete comfort for the best performance.

The surface finishing is the typical Neró pattern.

LENGTH: 820mm / WIDTH: 190mm / ANGLE: 33°

WATER RAIL: Grey / Constant  

HARDNESS: SOFT and MEDIUM

Learn More

PATHOS SUPREME Carbon blades are made of 285-T2 pure Carbon Fiber. This fabric is proven to be the best choice for our carbon blades due to the combination of high resistance and instant reaction. The selected carbon fiber combined with the best quality epoxy resin provides stiffness, reliability and long life. The carbon weaving style eliminates wrinkling, cracking and distortion of the blade and ensures complete resin soaking, while it insures rapid recall and extra flexibility. Learn More

New Elliptic Carbon Blades from Apnea
In four stiffness types:

79cm x 19cm. Learn More

A tapered, high-quality elastomer blade that facilitates excellent agility and performance. This high-performing fin offers variable thickness and increased maneuverability without sacrificing the length and strength of the fin's blade. An excellent choice for freedivers looking for a more rigid and reactive fin.

Learn More

New Elliptic Carbon Blades from Apnea
In four stiffness types:

79cm x 19cm. Learn More

New Elliptic Carbon Fins from Apnea with c4 300 footpockets
In 3 stiffness types:

790mm x 190mm. Learn More

Carbon Ultimate 28° blades 100% carbon.
Wider and longer blade made for Fireblade footpocket.

Soft for diver's weight < 75kg

Medium for diver's weight 75kg - 90kg

Hard for diver's weight > 90kg

Learn More

Long fins for freediving and spearfishing. The new color makes them visible on the surface and camouflage on rocky and sandy bottoms. 22-degree downturned blade. The keyhole improves its performance by channeling water and guiding the blade during movement. In addition, the hole also serves to decrease the force needed to move the fin in the less active area of the blade. Learn More

The classical construction Carbon blades with internal knit X shape evolves with the use of new materials and processing, maximizing the performance and nervousness lifetime. Learn More

Ο πρωτοποριακός σχεδιασμός με γωνία 30 μοιρών και προοδευτική τοποθέτηση πολλαπλών στρώσεων ανθρακονημάτων αποκλειστικότητας της Meister, αποδίδουν την μέγιστη εκρηκτικότητα επαναφοράς της λεπίδας.
Ίσως το πιο εκρηκτικό πέδιλο παγκοσμίως!
Ιδανικό για ψάρεμα με σταθερά βάρη και μέγιστη απόδοση σε βαθιά ελεύθερη κατάδυση.
Χρώμα: Μαύρο(carbon)
Εξωτερική επιφάνεια ματ με ανάγλυφο το λογότυπο της εταιρείας στην οπίσθια όψη.
Παράγεται σε πέντε βασικές σκληρότητες και κατά παραγγελία.

Learn More

The Carbon blade of the Gara Modular Impulse completes the range of Cressi fins, inserting a bending angle of 29 degrees, which allows you to further increase the dynamic performance of the fin.

Price for ITEM NOT A PAIR

 

TECHNICAL FEATURES:

• Excellent propulsive performance without tiring anyone, beginners or professionals
• Extremely thin and light blade in compound made of Carbon developed by Cressi with different thicknesses
• Footpocket / blade angle of 29 degrees

Learn More

The blade of the Gara Modular Impulse completes the range of Cressi fins, inserting a bending angle of 29 degrees, which allows you to further increase the dynamic performance of the fin. The blade has an incredible resistance to any type of shock, impact or stress, making it almost impossible to break accidentally.TECHNICAL FEATURES:- Excellent propulsive performance without tiring anyone, beginners or professionals- Extremely thin and light blade in compound made of elastomerized technopolymers developed by Cressi with different thicknesses- Stringer consisting of technopolymers with elastomeric loads with high exural modulus- Footpocket / blade angle of 29 degrees Learn More

Learn More

The use of faster and simpler construction methods and materials applied to economical series of fins SPORT Meister proposed an efficient and reliable choice for your first contact with composites
Material Carbon 100% purity Learn More

CarbonFiber blades realized from top quality glass fibers. The blade feature progressive stiffness and provides maximum thrust with minimum effort. Available in three different stiffness types: SOFT, MEDIUM, HARD. Blade length 75cm. Learn More

GlassFiber blades realised from top quality glass fibers. The blade feature progressive stiffness and provides maximum thrust with minimum effort. Available in three different stiffness types: SOFT, MEDIUM, HARD. Blade length 75cm. Learn More

CarbonFiber blades realized from top quality glass fibers. The blade feature progressive stiffness and provides maximum thrust with minimum effort. Available in three different stiffness types: SOFT, MEDIUM, HARD. Blade length 75cm. Learn More

CarbonFiber blades realised from top quality glass fibers. The blade feature progressive stiffness and provides maximum thrust with minimum effort. Available in three different stiffness types: SOFT, MEDIUM, HARD. Blade length 78cm. Learn More