Short Fins

The closed-foot version of the Reaction fins, the buckle-up version has met with full approval from divers. The frame is moulded in three different materials, according to the Cressi patented system that guarantees surprisingly smooth and powerful kicking. The blade is rather long, and has a differentiated thickness - thicker at the front end of the foot, it gets progressively thinner towards the end of the blade. The wide- soled foot is very comfortable and outstandingly enveloping thanks to the extensive use of elastomers. The soles are completely covered in thermo-rubber to give them an excellent grip on boat decks. These fins have been designed not just for swimming and free-diving, but also for scuba diving, where they will surprise you with their fantastic performance. Learn More

Avanti Tre features a soft anatomical orthopedic foot pocket, and mid-sized blade with three channels for optimal movement of water during the kicking cycle. Tre is perfect for travel to warm water locations. Upper and lower stabilizers help transfer energy from the foot pocket to the blade. Fin gives an easy kick for extended snorkeling time. Super-channel is designed for the diver who wants the perfect blend of power and efficiency in one fin. The Avanti Tre, Mares design is inspired by marine mammals. Channel Thrust technology maximizes the channeling of water and moves a much greater amount of water compared to other fins of the same size. The result is greater thrusting power with the same amount of effort. The result: superior comfort and performance. The new blade design with a large central Super-channel and two traditional lateral channels provide excellent thrust while maintaining hi-efficiency and minimizing leg fatigue. Overall fin lengths are from 22 to 26.8 (56 to 68 cm) and weight 2 lbs to 3.1 lbs (0.92 kg to 1.4 kg). Avanti Tre comes in Black, Blue or Yellow, six sizes to choose from and has a 24 month limited warranty. Learn More

The new Gara Turbo Sprint fin is a shorter version of the Gara Turbo fin.

Sprint is designed to meet the needs of freedivers and spearfishers who practice this sport in wintertime and when a blade as long as Impulse is not necessary.

Both fins have been designed using expensive finite element software programs that allow highly complex and
equally high-performance sections to be defined.

The blade of Sprint, like the Impulse blade, is mad of a single thermoplastic elastomer, although it would be more correct to refer to an angled sublayer and an overlay.

The sublayer follows the shape and dimensions of almost the entire fin.

It has a uniform thickness and a flexible longitudinal propulsion wing of variable length.

When disassembled, the blade and foot pocket occupy the space of a normal snorkeling fin.

The new Gara Modular Sprint fin is a shorter version of the Impulse
fin, which proved to be hugely popular with freedivers worldwide,
both amateurs and the most demanding professional freedivers.
This is also confirmed by the large number of articles dedicated to
it by specialized journalists in sector magazines.
Sprint is designed to meet the needs of freedivers and spearfishers
who practice this sport in wintertime and when a fin as long as
Impulse is not necessary.
Both fins have been designed using expensive finite element
software programs that allow highly complex and equally highperformance
sections to be defined.
The blade of Sprint, like the Impulse blade, is made of a single
thermoplastic elastomer, although it would be more correct to
refer to an angled sublayer and an overlay. The sublayer follows
the shape and dimensions of almost the entire fin. It has a uniform
thickness and a flexible longitudinal propulsion wing of variable
length. In contrast, the so-called overlay covers the propulsion wing
selectively and has a thickness that slopes from the maximum value
to zero longitudinally towards the tip of the blade.
As a result, the fin offers a new way of storing and releasing elastic
potential energy, greatly assisting movement of the freediver’s legs
and thus guaranteeing a net improvement in propulsive output.
When disassembled, the blade and foot pocket occupy the space of
a normal snorkeling fin.

TECHNICAL FEATURES
- Excellent propulsive performance without tiring anyone,
beginners or professionals
- Thermoplastic rubber foot pocket ,certified Full Contact
- Standard blade/stringer interface with screws under
the foot pocket and side clips
- Extremely thin and light blade in compound made
of elastomerized technopolymers developed by Cressi
with different thicknesses
- Stringer consisting of technopolymers with elastomeric loads
with high flexural modulus
- Foot pocket/blade angle of 29 degrees

Learn More

Agua is a very easy fi n to use, and doesn’t require any special athletic or water-sport abilities, yet it still delivers excellent performance without tiring your feet. Thanks to the latest technology and Cressi’s experience in developing these products, we’ve been able to markedly decrease the weight of this fin compared to others in its category, while still preserving excellent responsiveness. The foot pocket features the original Self Adjusting Foot Pocket system, which thanks to the special softness and elasticity of the blends makes for a consistently soft and adherent fit. Learn More

Ο σχεδιασμός του HUNTER είναι βασισμένος στην τεχνολογία ώθησης μέσω καναλιών.
Διαθέτει δύο πλευρικά κανάλια και ένα μεγαλύτερο κεντρικό τα οποία μεγιστοποιούν την διοχέτευση και την μετακίνηση νερού με αποτέλεσμα μεγαλύτερη ώθηση ισχύος με ελάχιστη καταβολή προσπάθειας σε σύγκριση με άλλα πτερύγια ίδιου μεγέθους.
Επίσης διαθέτει πλευρά (ribs) ενισχυμένα με καουτσούκ και δύο τρύπες στο επάνω μέρος της λεπίδας με σκοπό την εκτόνωση της πίεσης του νερού κατά την μετακίνηση του.
Το εργονομικά σχεδιασμένο κλειστό πέλμα του είναι κατασκευασμένο από μαλακό θερμοπλαστικό ελαστικό προσφέροντας την μεγαλύτερη δυνατή απόδοση και άνεση.

Learn More

• Perfect Fins for dives in tropical waters or for snorkeling
• Created for Heavy Duty intensive use, guaranteeing maximum reliability and durability
• New ergonomic form of the shoe. The 25° blade inclination was studied to obtain the best performance with minimal effort.
• Blade material: technopolymer
• Shoe material: thermoplastic rubber.

Learn More

Learn More

Agua is a very easy fi n to use, and doesn’t require any special athletic or water-sport abilities, yet it still delivers excellent performance without tiring your feet. Thanks to the latest technology and Cressi’s experience in developing these products, we’ve been able to markedly decrease the weight of this fin compared to others in its category, while still preserving excellent responsiveness. The foot pocket features the original Self Adjusting Foot Pocket system, which thanks to the special softness and elasticity of the blends makes for a consistently soft and adherent fit. Learn More

The new Gara Modular Sprint fin is a shorter version of the Impulse fin, which proved to be hugely popular with freedivers worldwide, both amateurs and the most demanding professional freedivers. This is also confirmed by the large number of articles dedicated to it by specialized journalists in sector magazines. Sprint is designed to meet the needs of freedivers and spearfishers who practice this sport in wintertime and when a fin as long as Impulse is not necessary. Both fins have been designed using expensive finite element software programs that allow highly complex and equally highperformance sections to be defined. The blade of Sprint, like the Impulse blade, is made of a single thermoplastic elastomer, although it would be more correct to refer to an angled sublayer and an overlay. The sublayer follows the shape and dimensions of almost the entire fin. It has a uniform thickness and a flexible longitudinal propulsion wing of variable length. In contrast, the so-called overlay covers the propulsion wing selectively and has a thickness that slopes from the maximum value to zero longitudinally towards the tip of the blade. As a result, the fin offers a new way of storing and releasing elastic potential energy, greatly assisting movement of the freediver’s legs and thus guaranteeing a net improvement in propulsive output. When disassembled, the blade and foot pocket occupy the space of a normal snorkeling fin. Learn More

The best all-around full foot fin for diving or snorkeling. The Avanti Quattro Power is perfect for warm water divers, snorkelers and free divers who want ultimate power, comfort and speed. Using Mares Channel Thrust technology, the Avanti Quattro Power fins provide comfort combined with extraordinary performance. Available in black also. Learn More

Μαλακά πτερύγια με εργονομικά σχεδιασμένο κλειστό πέλμα που είναι κατασκευασμένο από μαλακό θερμοπλαστικό ελαστικό προσφέροντας την μεγαλύτερη δυνατή απόδοση και άνεση.

Learn More

A traditional style adjustable fin, soft and flexible guarantee high performance thanks to the double ribbing of the blade to optimize the channeling of the water. Ideal for use in schools and diving centers. Blade material: technopolymer • Shoe material: thermoplastic rubber Learn More